Mould

The Airmaster BlueLine ozone generators eliminate the smell of mould quickly and effectively. Ozone breaks down and kills off the mould spores, so the mould cannot spread, we no longer have to breathe in harmful mould spores and the unpleasant odour is eliminated.

How to use the Airmaster ozone unit for eliminating mould

1. Preparation:
First of all the existing mould must be removed. For this purpose, use a conventional mould-killing agent. Any damaged building materials should be replaced.

2. Ozone treatment:
Place the ozone generator in the middle of the room smelling of mould (preferably in a slightly elevated position, e.g. on a table). Switch on he ozone generator and set the timer to the required time (models with a timer).

3. Duration of treatment:
4-72 hours, depending on the intensity of the odour. The average treatment period is 24 hours.

4. After the ozone treatment:
Switch off the ozone generator and open the windows. Let the remaining ozone escape (smells rather like chlorine). Check the room. If unwanted odours persist, repeat the procedure. All affected rooms must be treated separately.

Warning!
During an ozone treatment you should not enter the area being treated, as ozone is harmful for the airways. Brief ozone exposure (e.g. in refuse rooms etc.) is not harmful. linkarrow Find out more in our ozone school

Recommended products for Mould

  • Airmaster BLC 500-D

    737.50

    500 mg/h | Odour elimination in hotel rooms, vehicles, boats and refuse rooms. Exhaust air treatment in grease separators and refuse containers, as well as water treatment.